Hydraulic oil purification machine introduction:
It is used for purification and filtration of high precision lubricating oils such as used hydraulic oil, refrigerator oil, antiwear hydraulic oil etc.
Hydraulic Oil Vacuum oil purifier mainly deals with unqualified industrial oil such as mechanical oil, hydraulic oil, compressor oil and refrigerating oil, which can quickly and effectively remove the water, gas, impurities and volatile oil (such as alcohol, gasoline, ammonia Gas, etc.), restore the oil viscosity, flash point and performance. After treatment, the emulsified oil has low emulsification value, very little water content and high impurity precision, and can be reused repeatedly in high-precision hydraulic lubrication equipment.
Feature:
1. With strong impurities filtration ability and large-area, mass and deep precision filtration material can remove the tiny and fine impurities from used lubricants. With PM filter can filter off ferreous impurities.
2. Unique degassing and dewatering system, adopts mature film evaporation and 3D flash distillation technology, and multi-stage oil water separating technology, can quickly remove free and dissolved water and gases.
3. Electrical heating device is the optimized pipeline design, to ensure the unique heating and stable oil temperature.
4. Automatic constant temperature control device, automatic liquid level control device, automatic defoaming device, automatic pressure protection device and excellent configuration can ensure the equipment in high performance.
5. Work online with unattended operation and the indicator lights display the running status.
6. The complete unit adopts the safety interlock device. The discharge oil pump, vacuum pump are interlock to the heating device to avoid adverse effect of misuse.
7. Compact design, low noise, easy operation, longtime free maintenance, low power consumption, running cost saving.
Technical Data:
| Item | Unit | TY-A-10 | TY-A-20 | TY-A-30 | TY-A-50 | TY-A-100 | TY-A- 150 | TY-A-200 | TY-A-300 |
| Flow rate | L/min | 10 | 20 | 30 | 50 | 100 | 150 | 200 | 300 |
| Working vacuum | Mpa | -0.06 ~- 0.095 |
| Working pressure | Mpa | ≤0.4 |
| Temperature degree | ℃ | 0~100 |
| Power supply |
| 380V/50HZ/3Ph 5 wire(as customer’s requirement) |
| Working noise | dB(A) | ≤65~80 |
| Working time | H | ≥ 4000 |
| Continuous working time | H | 150 |
| Heater (optional) | kW | 12 | 15 | 18 | 24 | 45 | 60 | 72 | 84 |
| Total electric power | kW | 14 | 17 | 20 | 27 | 48 | 66 | 81 | 97 |
| Outlet(inlet)caliber | mm | Φ25 | Φ25 | Φ25 | Φ32 | Φ42 | Φ50 | Φ50 | Φ60 |
| Weight | kg | 400 | 450 | 500 | 600 | 800 | 1000 | 1100 | 1550 |
| Size | L(mm) | 1500 | 1550 | 1600 | 1650 | 1700 | 1750 | 1900 | 2000 |
| W(mm) | 800 | 850 | 900 | 950 | 1000 | 1200 | 1300 | 1350 |
| H(mm) | 1600 | 1650 | 1700 | 1750 | 1800 | 1800 | 2000 | 2100 |
| Moisture content | ≤50PPM |
| Index after filtering | Gas content | 0.1% |
| Demulsification value | ≤15min |
| Degree of cleanliness(NAS 1638) | 4 |
| Impurity size | ≤1μm((Customerizable) |
OPTION MODELS:
1. The unit can adopt PLC intelligent control device with touch screen operation and dynamic display as customer's requirements.
2. The unit can be designed as mobile, fixed and trailer models.
3. The unit can be designed as totally enclosed type, canopy type and open wide type.
