New Hydraulic Lube Oil Purifier with Automatic Defoaming Unit Application
Vacuum Hydraulic Oil Filtration System is used in addition to vacuum separation of water in the vacuum heating oil temperature reaches 60 ℃, the water began to evaporate through the condensing system, in addition to achieve the effect of water through increased power, faster water removal, in addition to the water content can reach 10% of the oil. The vacuum hydraulic oil filtration system can remove water effectively and increase the service life of equipment operation. It is designed with 2024 version vacuum technology and automatic defoaming deice.
HOPU TYA series Vacuum hydraulic lubricating oil purifier mainly deals with unqualified mechanical oil, hydraulic oil, compressor oil, turbine oil, refrigerator oil etc. It can quickly and effectively remove water, gas, impurities and volatiles (such as alcohol, gasoline, ammonia, etc.) from oil. it restores oil viscosity, flash point and other performance indicators. The filtered oil is low emulsification value, low water content, high cleanliness, which can be used again and again in high-precision hydraulic lubrication equipment. TYA Oil Purifier is suitable for various kinds of lubrication purification and regeneration treatment in petroleum, chemical, mining, metallurgy, power, transportation, machinery manufacturing, railway and other industries.
Oil Purifier Features
1. Removing 100% free water, reducing dissolved water down to 50 ppm or less.
2. Removing 99% particulate more than 1 micron or higher
3. Over pressure alarm system, overloaded protect system, emergency stop system , plugged filters indication
4. Gear type discharge pump, fully automatic liquid level controller.
5.High processing efficiency, deliver outstanding technical performance and enhance environmental safe
6.High-efficiency vacuum dehydration and degassing with 2024 new tachnology
7. Safety interlock protection: oil pump, vacuum pump, heater interlock protection
8. Humanized instructions: automatic design, and there are instructions such as oil temperature gauge, pressure gauge, vacuum gauge, filter pollution alarm, operating status and so on.
9.The water separator uses high-molecular coalescing material as filtering medium, which integrates emulsification, dehydration and impurity removal.
New Hydraulic Lube Oil Purifier Technical Specifications
| Item | Unit | TYA-10 | TYA-20 | TYA-30 | TYA-50 | TYA-100 | TYA-150 | TYA-200 | TYA-300 |
| Flow Rate | L/min | 10 | 20 | 30 | 50 | 100 | 150 | 200 | 300 |
| Vacuum Degree | MPa | -0.06 ～ -0.095 |
| Working Pressure | MPa | ≤0.4 |
| Temperature | ℃ | 0 ～ 100 |
| Power Supply |
| 3phase,50Hz, 380V (Can be designed) |
| Working Noise | dB(A) | ≤75 | ≤75 | ≤75 | ≤78 | ≤78 | ≤78 | ≤80 | ≤82 |
| Heating power(optiona) | kW | 18 | 21 | 24 | 30 | 42 | 51 | 65 | 72 |
| Total power | KW | 21 | 23 | 26 | 33 | 46 | 56 | 70 | 80 |
| Inlet/outlet caliber | mm | 25 | 25 | 25 | 32 | 49 | 62 | 75 | 84 |
| Weight | Kg | 400 | 450 | 500 | 550 | 750 | 850 | 950 | 1000 |
| Dimension | Length | mm | 1500 | 1500 | 1500 | 1600 | 1750 | 1900 | 1900 | 2100 |
| Width | mm | 1000 | 1050 | 1050 | 1150 | 1250 | 1600 | 1700 | 1700 |
| Height | mm | 1200 | 1600 | 1600 | 1700 | 1800 | 1950 | 2000 | 2100 |
| Parameter After Purification |
| Demulsification value | min | New oil ≤15min, running oil ≤30min |
| Impurity content | Micron | 1-5 |
| Water Content | PPM | ≤20 |
| Gas Content | % | ≤o.1 |
| Cleanness | NAS | ≤5 grade |
We are profession exporter, provide service worlwide!Your inquiry will be replied within 12 hours due to time zone difference
Your inquiry is warmly welcomed!
HOPU Website: www.hopufiltration.com
Branch 1: www.hpoilsolution.com
Branch 2: www.hopuoilpurify.com
